1 Inch Air impact driver 1250 FT/LBS of torque.  Minimum of 35CFM at 90PSI to operate.  

530lbs of Torque.  30CFM Compressor minimum to run this item.

We have a large variety pullers for cars, trucks and SUVs.  Give us a call or stop in for sizes and prices. 

Welder Wire Feed Lincoln MIG 211

Helmet Available for deposit.  

Engine Hoist 1500lb 10' Towable

Engine Hoist 1500lb 8' Towable

Engine Hoist 1500lb

JET 22-1/2-Ton Capacity Hydraulic BOTTLE JACK -- JET JHJ Series bottle jacks are used for multiple applications: pushing, bending, pressing, or straightening. With base and cylinder electrically welded together to assure strength and eliminate leaks, extreme temperatures do not affect them. The JET low profile truck models or standard models vary in capacities from 12-1/2 tons to 100 tons. All JHJ Series bottle jacks comply with ANSI/ASME B30.1 and PALD-1 standards. See True Value # 724623

JET 12-1/2-Ton Capacity Hydraulic BOTTLE JACK -- JET JHJ Series bottle jacks are used for multiple applications: pushing, bending, pressing, or straightening. With base and cylinder electrically welded together to assure strength and eliminate leaks, extreme temperatures do not affect them. The JET low profile truck models or standard models vary in capacities from 12-1/2 tons to 100 tons. All JHJ Series bottle jacks comply with ANSI/ASME B30.1 and PALD-1 standards. See True Value # 724615

JET 3000LB SHORT SERVICE JACK w/ Quick-Lift Pump -- Features automatic safety overload bypass system. Full swivel, ball bearing rear casters are positioned for best load distribution and optimal maneuvering . "Quick Lift" pump feature with no load. Complies with ANSI/ASME PALD-10 standards

JET 20-Ton Capacity SJ Series SCREW JACK -- Contractor quality mechanical jack for all-purpose lifts and supports. Holds heavy loads indefinitely - will not creep. Heavy-duty bell shaped cast base. Less effort required to lift capacity load with new design. Corrugated steel swivel head turns easily under load. Easy to carry and position with built-in handle. Compliance: ANSI/AMSE B30.1 standards
Turning bar is optional. See True Value # 724607

JET 10-Ton Capacity SJ Series SCREW JACK -- Contractor quality mechanical jack for all-purpose lifts and supports. Holds heavy loads indefinitely - will not creep. Heavy-duty bell shaped cast base. Less effort required to lift capacity load with new design. Corrugated steel swivel head turns easily under load. Easy to carry and position with built-in handle. Compliance: ANSI/AMSE B30.1 standards. Turning bar is optional