Provides extra leverage when positioning steel members and aligning bolt holes.
Forged fit-up bar is pointed on one end.
Chisel-end is at a 15° angle to give greater leverage.

Provides extra leverage when positioning steel members and aligning bolt holes.
Forged fit-up bar is pointed on one end.
Chisel-end is at a 15° angle to give greater leverage.

Leather construction.
Has tool-slots for two erection wrenches.
Tunnel loop is riveted to assure long life.
Holds erection wrenches and adjustable head construction wrench Cat. No. 3239.

Four pockets for easy access to a variety of tools.
Includes knife snap.
Riveted leather construction ensures long life.
Slotted to fit belts up to 2'' (51 mm) wide.
Made in the USA.

Leather construction.
No exposed rivets in back.
Riveted to assure long life.
Pockets for 7'' (178 mm), 8'' (203 mm), and 9'' (229 mm) side-cutting pliers, most screwdrivers, 6' (1.83 m) folding rules, and open end wrenches from 9/16'' (14 mm) to 13/16'' (21 mm).
Nickel plated alloy snap.

Strong, heavy-duty leather.
Equipped with a double-tongue buckle.

Made of tough No. 4 canvas.
Heat-resistant, hard-leather bottom.
Web loop for sliding over belt.

No. 10 canvas bag with strong zipper.
Convenient storage for pliers, wrenches and other tools.

75 lb. (34 kg) Max Load Rating.
Web handle extends down the sides of the bucket for added strength.
Durable, straight-wall and tapered-wall buckets are made of heavy-duty canvas.
High-density polyethylene top ring for strength and chemical resistance.
No. 6 canvas. The No. canvas refers to the canvas weight. No. 1 being the thickest and No. 8 being the thinnest.
With swivel snap Cat. No. 2012.
Black molded polypropylene bottom.
Made in the USA.

100 lb. (45.4 kg) Max Load Rating.
Polypropylene-rope handle reinforced with leather for water resistance and strength.
Durable, straight-wall and tapered-wall buckets are made of heavy-duty canvas.
High-density polyethylene top ring for strength and chemical resistance.
No. 1 canvas. The No. canvas refers to the canvas weight. No. 1 being the thickest and No. 8 being the thinnest.
Leather reinforced bottom.
Inside pocket measures 8'' (203 mm) x 8'' (203 mm).
With swivel snap Cat. No. 2012.
Load rated 100 lbs. (45.4 kg)
Made in the USA

Same durability as Klein 5416 Series bull pin and bolt pouch.
Durable 3'' (76 mm) drawstring closing top prevents items from falling out of pouch at height.
Extra tall construction for more storage space.
Pouch constructed of heavy-duty No. 4 canvas.

Leather version (5416 and 5416T are made of canvas).
Bolt bag with bull-pin loop on each side.

No. 4 canvas with double bottom.
Bolt bag with bull-pin loop on each side.

No. 4 canvas with double bottom.
Bolt bag with bull-pin loop on each side.
Made in the USA.

With standard capacities to 1500 lbs [680 kg], Powr-Grip vacuum lifters can efficiently lift, maneuver and transport large counter tops without breaking your back or your budget. From the fabrication shop to final installation, handling counter tops is more efficient and less challenging with vacuum cups, vacuum lifters and other products by Wood's Powr-Grip.

NT65MA4
NT65MA4 2-1/2" 15-Gauge Angled Finish Nailer with Air Duster

The NT65MA4 15-Gauge angled finish nailer is the ideal nailer for installing crown and base moldings, window and door casings, cabinets, exterior trim and staircases. Its compact body and angled magazine make for easier placement and operation in tight angles. The integrated air duster clears debris from the work site allowing for faster and cleaner job completion. The NT65MA4 accepts 15-gauge nails from 1-1/4" up to 2-1/2" in length.

Nailer Coil 2 1/2"

Nailer Framing 8d - 12d

The Model 45 is a manual, single-blow nailer which use 16 gage cleats to install Tongue & Groove flooring.

The Model 45 is recommended for use on board sizes of 5/8", 3/4" and 33/32" Tongue and Groove flooring.

Nailer package includes a choice of a Black or White 5mi Mallet, an extra driving blade, plunger spring, feeder spring, blade retainer and 8/25 adapter plate for installing 3/4" & 22mm Tongue and Groove Flooring.

Options: Adapter plate 826-12 for 1/2" Tongue and Groove flooring, or adapter plate 826-58 for 5/8" Tongue and Groove flooring.