S3510SJ
Model: OTS
OTS Features:

    Lightweight nylon temples adjust for length and pitch
    Designed to better fit today’s prescription eyewear.
    Single lens encapsulates the eye for superb protection.
    Exceeds the ANSI Z87.1 High Velocity Impact Standards.
    CAN/CSA Z94.3-07
    CE EN 166 Certified

 SB4320D
Model: Solara
Solara Features:

    Straight back temples with rubber insert provides comfort fit.
    Built in nose pads elevate frame for precision fit and weightless wear
    Extended lens provides complete coverage
    Exceeds ANSI Z87.1 High Impact Requirements

 SB1810R20
Model: V2-Readers
V2 Readers Features:

    Nose buds secure the glass and prevent slipping while providing a pillow soft fit.
    Strategic placement of lens insert is out of user’s direct line of vision.
    Exceeds ANSI Z87.1 High Impact Requirements
    CE EN166 Certified
    CAN/CSA Z94.3-07

Outlander Features:

    Sporty dual lens style with wide temples provides full eye protection against high impact.
    Soft nose piece provides comfort for extended use without slipping.
    Suitable for both working environments and sports activities.
    Meets ANSI Z87.1 High Impact Requirements

 S4110SMP
Model: Intruder
Intruder Features:

    Economical lightweight glass offers superior protections.
    Comes with six assorted temple colors: Red, Blue, Green, Purple, Orange, Black.
    Multi-pack includes two of each temple color with clear lenses.
    Exceeds the ANSI Z87.1 High Velocity Impact Standards.
    CAN/CSA Z94.3-07

 S5870S
Model: Itek
Itek Features:

    Newly designed ventilated nosepiece allows heat to dissipate from nose bridge to reduce fogging.
    Soft dual injected rubber temple tips and flexible nosepiece provide non-slip comfort.
    9.75 base curved lens provides excellent side protection against airborne particles.
    Lightweight, frameless protection is ideal for all-day wear.
    Exceeds ANSI Z87.1 High Impact Requirements
    Meets MCEP GL-PD 10-12 Ballistic Standards.
    CAN/CSA Z94.3-07
    CE EN166 Certified

 S5880S
Model: Itek
Itek Features:

    Newly designed ventilated nosepiece allows heat to dissipate from nose bridge to reduce fogging.
    Soft dual injected rubber temple tips and flexible nosepiece provide non-slip comfort.
    9.75 base curved lens provides excellent side protection against airborne particles.
    Lightweight, frameless protection is ideal for all-day wear.
    Exceeds ANSI Z87.1 High Impact Requirements
    Meets MCEP GL-PD 10-12 Ballistic Standards.
    CAN/CSA Z94.3-07
    CE EN166 Certified

 S2510S
Model: Ztek
Ztek Features:

    Economical wrap-around single lens provides full panoramic view
    Soft non-slip rubber temple tips provide non-binding fit.
    Integrated nose piece.
    Exceeds ANSI Z87.1 High Impact Requirements
    CE EN166 Certified
    CAN/CSA Z94.3-07

Clear Lens:

    General purposes for indoor applications that require impact protection.
    Offers protection from excessive glare
    Provides 99% protection from harmful UV-A and UV-B rays.
    100% polycarbonate lenses
    Scratch-resistant lenses
    Also Available in Anti-Fog S2510ST
   

   Shell constructed from high density polypropylene materials.
    Offers impact and penetration resistance.
    Ridgeless low profile design.
    No rain trough - Prevents pooling of liquids.
    Ideal for linemen - Meets ANSI Class E Standards.
    Soft brow pad absorbs perspiration.
    Replacement suspensions are available.
    Custom imprinting available on all hard hats.
    Meets ANSI Z89.1-2009 Standards, Type I, Class, C, G, and E

• Superior visibility when laying out boundaries
• 1-3/16" wide, Economical and Reusable
• Fluorescent colors are all 150 feet long

21" White Marking Flag (100 pack)

1000 ft. roll Economy Grade Caution Tape

Bright orange 1 piece mold construction helps reduce cracking
    Road-gripping cleats help keep cone in place
    Meets federal MUTCD (Manual on Uniform Traffic Control Devices) specifications
    Performance tested by a strict 11 point system
    Use to increase visibility, block off areas or for general safety purposes

Part numbers:

    12″ = 10073410
    18″ = 10073409
    24″ = 10073408

Resinet SLM40 was designed to replace the old plastic diamond mesh. With the vertical and horizontal strands, this product is an easy install and will withstand the most severe weather conditions.

Hi-Vis polyester outer shell
Heavy fleece inner lining
Extra long chin strap
Headgear straps & heat element pockets
Size: One size

ANSI/ISEA 107-2010 Class E Pants
-Polyester oxford with PU coating
-2" wide reflective stripes
-Two pass-through slits for front pocket access
-Elastic and draw cord with cord lock on waist
-Adjustable zippers on ankles for safety and comfort
-Color: Lime green
-Size: S-5XL

-Polyester oxford with PU coating
-Double stitches & taped for waterproof
-Rain coat with detachable hood
-Storm fly front with snap closure
-Mesh lining on upper body
-Two flap pockets with velcro closure
-One inside cell phone pocket
-Adjustable velcro cuffs
-Under-arm vents
-2" wide reflective stripes
-Size: S-5XL

ORANGE 100% Acrylic watch cap
Silver reflective stripe

LIME 100% Acrylic watch cap
Silver reflective stripe

    ANSI-compliant 150D oxford polyester
    Mesh venting panels
    1" Level 2 ANSI-compliant reflective material with contrasting color
    Two sizes: S/M (21-22.5"/ 53-57cm) L/XL (22.5-24"/ 57-61cm)
    Lime, Orange

• ANSI/ISEA 107 Class 2 Compliant T-Shirts

• Short Sleeve

• Birds Eye Polyester Material

• 2” Silver Reflective Tape

• 1 Left Breast Pocket

• Sizes S-5X

-2" wide sewn on ventilated reflective stripes
-Long sleeves
-One chest pocket
-Size: S-5XL

    ANSI 107-2010 Class 2 Level 2
    2" silver 3M™ Reflective Material
    Zipper front closure
    1 interior pocket
    Sizes: (M/L), (XL/2XL), (3XL/4XL)

ANSI 107-2010 Class 2 Level 2
2" silver 3M™ Reflective Material
Zipper front closure
1 interior pocket
Sizes: (M/L), (XL/2XL), (3XL/4XL